Bentley Continental Supersports Convertible, 2011

Bentley Continental Supersports Convertible, 2011

 

 

 

The Bentley Continental Supersports Convertible further strengthens Bentley's supercar range, following the introduction of the Bentley Continental Supersports Coupé in 2009. The new Supersports Convertible, with the same 630PS (621bhp/463kW) twin-turbocharged W12 engine, is the fastest, most potent drop-top Bentley has ever built, offering the ultimate Bentley driving experience in the world's most dramatic convertible.

A highly focussed, pure Bentley driving experience
With 630PS (621bhp) and 800Nm (590lb ft) of torque from its pioneering FlexFuel engine and new 'Quickshift' transmission, the Bentley Continental Supersports Convertible is the fastest drop-top Bentley has ever built. It accelerates from 0-60mph in 3.9 seconds (0-100km/h in 4.2 seconds) and, conditions permitting, can continue onto a top speed of 202mph (325km/h).

The increased power and torque are transmitted to the all-wheel drive system via an uprated and rapid six-speed Quickshift transmission, which more than halves shift times (to just 93 milliseconds) and maximises the new Convertible's enormous potential. The revised gearbox also has the ability to deliver double downshifts (sixth to fourth gear, for example) and improves acceleration across the entire gear range. To cope with the additional power and torque, the planetary gear set of the ZF transmission is also strengthened.

Positive torque during downshifts is achieved through engine and gearbox electronic controller interaction for extra throttle and fuel injection during the overrun. During transmission upshifts, fuel and ignition are cut momentarily to give faster mechanical shift times through torque reduction, also improving shift quality and durability.

Designing the 'extreme' Bentley convertible- where form follows function
The evolution of the Bentley Continental Supersports Convertible's design is very much a case of form following function, with new purposeful sculptural forms signalling the engineering changes beneath the skin. Key engineering-led design changes to the Supersports include:
    * Revised front air intakes and new bonnet vents to improve airflow and cooling
    * Flared rear wings to accommodate wider rear track
    * Discreet bootlid spoiler benefitting aerodynamic balance at high speeds

The increased power and torque of the W12 engine necessitated an additional 10 per cent airflow to the twin turbocharger intercoolers and cooling system. With extensive use of Computational Fluid Dynamics techniques, Bentley's designers responded with a purposeful and dramatic style, featuring large vertical intake apertures. Twin bonnet vents were added to ensure positive air extraction.

From the front, the radiator, lower grille and dual bonnet vents are finished in a striking Smoked Steel finish. Derived from an innovative technology normally used to apply a coating to luxury watches and specialised industrial tools, Physical Vapour Deposition (PVD) is a complex and time-consuming process that involves vaporised metal being deposited onto the surface of, in this case, stainless steel.

Giving a darker, more solid appearance, it is the first use of a PVD finish on stainless steel in the car industry. In addition to the Smoked Steel finishes, a gloss black finish to the headlamp casings and rear lamp clusters gives the Bentley Continental Supersports convertible's distinctive face and muscular rear additional visual impact.

Restyled - and more aerodynamic - door mirrors match the exterior paint choice and the window and door surrounds replace polished stainless steel with a Smoked Steel finish to match the front grille. Eye-catching, black gloss Bentley-branded brake calipers act on the carbon ceramic brakes. Surrounding the brakes are the unique 20-inch, forged alloy wheels with Smoked Steel-finish which are exclusive to Supersports models. Large diameter tailpipe trims round out the car's purposeful stance when viewed from the rear. Beneath the bonnet Supersports badges grace the cover of the 630PS (621bhp) W12 engine.

The Bentley Continental Supersports Convertible has an electrically operated, three-layer fabric hood with advanced acoustic insulation to provide superb levels of refinement and comfort when raised. A choice of eight hood colours are available, including a new Dark Grey Metallic option, which is achieved by weaving a 'grey' acrylic fibre with a semi-transparent 'metallic effect' fibre in a twill weave construction to create a directional colour effect.

Bentley Continental Supersports, 2010

Bentley Continental Supersports, 2010

 

 

The Bentley Continental Supersports is the fastest and most powerful Bentley ever. It is the extreme Bentley, a muscular two-seater that delivers supercar performance and a highly focused driving experience. The Bentley Continental Supersports is also the first Bentley capable of running on both petrol (gasoline) and biofuel, pioneering the use of FlexFuel technology in the luxury sector. This represents stage one of the company's commitment to make its complete model range compatible with renewable fuels by 2012. Available worldwide from autumn 2009, the Bentley Continental Supersports will be FlexFuel compatible in the majority of markets from launch with North American cars offering the capability by summer 2010, following regulatory approval.

The Bentley Continental Supersports began as an 'under the radar' project exploring the possibilities of weight reduction on the Bentley Continental GT but with more power and torque. A largely experimental process crystallised over a period of 24 months into an official new car programme, driven by the passion and enthusiasm of a small group of Bentley engineers and designers. The results are dramatic. With 630PS (621 bhp) and new 'Quickshift' transmission that halves shift times, the Bentley Continental Supersports sets new performance benchmarks for Bentley. It accelerates from 0-60 mph in 3.7 seconds (0-100 km/h in 3.9 seconds) with a top speed of 204 mph (329 km/h).

The supercar performance is complemented by an array of chassis enhancements including retuned steering and suspension, utilising lighter weight components, retuned dampers and anti-roll bars. Agility is further sharpened by the 40:60 rear-biased torque split for the all-wheel drive system, a wider rear track, bespoke lightweight 20-inch alloy wheels and a unique electronic stability programme. Carbon ceramic brakes are standard fitment, benefiting steering response, grip and ride comfort, while saving weight. Overall, the engineering team have achieved a weight reduction of 110 kg (243 lb) compared with the Bentley Continental GT Speed.

The evolution of the Bentley Continental Supersports' design is very much a case of 'form following function' with new purposeful sculptural forms signalling the engineering changes beneath the skin. For example, the increased power and torque of the W12 engine necessitated additional airflow to the twin turbocharger intercoolers and cooling system. Bentley's designers responded with a purposeful and dramatic style that features large vertical intake apertures and twin bonnet vents. Similarly, new flared rear wings that accommodate the 50 mm (2 inches) wider rear track are designed to emphasise the powerful stance of this ultra-high performance coupe. The resultant Supersports style combines the looks of the iconic Continental GT with a new and distinctive appearance that reflects its more extreme character.

The Bentley Continental Supersports is further distinguished from its Continental coupe stable mates by a unique dark-smoked steel finish to all exterior 'brightware', including front grilles, lamp bezels, window surrounds and wheels. A complex 'Physical Vapour Deposition' process is applied to all stainless steel components to give a lustrous and highly durable finish. A car industry first, this process is normally used as a coating on industrial tools, watches and even hip replacement joints.

Fully embracing the extreme spirit of the Supersports, Bentley's interior designers have created a unique ambience. The cockpit represents a dramatic reinterpretation of Bentley interior design in which carbon fibre and Alcantara not only convey a sporting and contemporary style but also reduce weight. The Bentley Continental Supersports is a strict two-seater featuring all-new lightweight sports seats with carbon fibre clamshell rear panels. In the rear compartment, the seats are replaced by a stowage deck with a carbon fibre luggage retaining beam. The new interior also provides a showcase for the skills of Bentley's craftsmen and women at the company's factory in Crewe, England. Signature premium grade leather and brightware are complemented by carbon fibre panels, replacing traditional wood veneers.

The Bentley Continental Supersports is capable of running on either petrol and E85 biofuel or any combination of the two. E85 biofuel can offer a reduction of up to 70 per cent in CO2 emissions on a 'well-to-wheel' basis. Well-to-wheel is a measurement of a fuel's net CO2 contribution to the atmosphere, not just tailpipe emissions. It is a way of quantifying how much CO2 a fuel emits from its growth or extraction (well) to its combustion or deployment (wheel). It includes refinement, distillation and transport of the fuel. The fuel supply system detects the blending ratio of the fuel in the tank and ensures that power and torque remain constant regardless of the ratio of petrol to biofuel. The result is seamless power delivery in the Bentley tradition.

The 'Supersports' name is inspired by the original two-seater 3-litre Supersports model introduced in 1925, itself an evolution of the 3-litre Speed. The lightweight, 85 bhp Supersports was the first production Bentley to reach 100 mph and was also renowned for the application of Le Mans-winning race technology.

Bentley Continental Flying Star, 2010

Bentley Continental Flying Star, 2010

 

Flying Star in 2010 - the Bentley challenge
The Bentley Continental GT range set innovative and high standards for a new generation of very sophisticated Grand Tourers. As such, this model triggered the imagination of automotive designers and coach builders elsewhere. The GTC convertible, featuring a very rigid platform, proved to be a fully congruent basis to Touring Superleggera's plans for the new Bentley Continental Flying Star.

The new project required the modification of a number of external dimensions starting from the car's A-pillar backwards: extended roof line, a wider section including the doors, new aluminium door skins and a new all-aluminium, electrically operated tailgate. It also includes a completely new rear compartment with two foldable rear seats and a variable loading space.

This long list of modifications and transformations had to be paired with, and to remain fully compatible to the basic car's technical layout and components. Given the sophistication of the basic car, a new challenge was laid out for Touring's craftsmen and engineers. The final result proves that special coach building can live on well into the 21st. century working with respect to the original manufacturers.

Touring Superleggera is particularly proud of the fact that the complete productive cycle of the special coach building process was realized in their workshop near Milano. Modern body engineering went hand in hand with traditional handicraft skills, maintaining the highest quality directives for the final product.

Project Engineering
The body engineering processes at Carrozzeria Touring are aimed at safeguarding key parameters for quality, safety and feasibility, within the perspectives of low-volume automotive production. The project went through 1:4 and 1:1 modelling, based on the CAD and CATIA data from the basic vehicle. This digital basis resulted in a milled 1:1 master model and a number of 1:1 moulds for the manufacturing of the new external skin, and for important new body components. The rear bodywork was reinforced with an integrated structure between the rear suspension domes, functioning both as roll bar, and as support for the new, extended roofline.

Design
'Variations on a theme' not rarely implicate a larger design challenge, than starting-off with a white sheet of paper. The basic mission was to create a body incorporating the essence of Touring elegance and harmony, while clearly recognizable as a Bentley. This task was challenging because a fully new volume had to be added to the GTC basis. The proportions were totally new, but the overall design had to be kept consistent. That is why only the section in front of the car's A-pillar, including the windshield has been maintained.

Viewed from the rear, the new tailgate dives between the wide rear wings. The oval rear light chrome bezels are a reference to Bentley fastback cars of the '50. The side view features a low roof, prominent quarter panel shoulders and wide wheel arches, suggesting perfectly mastered energy.

The Touring Superleggera designers were challenged by the target to give the new interior equal elegance, whether the back of the rear seats are folded or not. The solution was to design an "S" shaped trim of the rear quarter panels linking the passenger area to the rear luggage area. The beige and dark green leather contrast also adds to this visual unity.

First time ever in this class and size, the twin individual rear seats fold completely to create a flat loading surface more than 2m long with 1200lt capacity. This is instrumental to fulfill the functional mission profile, which requires loading in full comfort a wide array of leisure equipment, including 4 full golfing bags with the rear seats up. An example of bespoke finish is the woven leather boot carpet offering superior endurance and coordinated with the special luggage set.

Manufacturing
When digital technologies are blended with traditional manufacturing skills, a fascinating process emerges that is typical for Touring Superleggera. A discriminating factor for traditional coach building was and is the vast amount of handwork that is involved in the creation of a new body. In this process, multiple practical solutions are also found for a wide variety of minor technical issues. This includes quick, practical solutions based on years-long experience, common sense and an expert eye.

Performance
The Bentley Continental Flying Star by Touring inherits the chassis of the Continental GTC. The 6-liter, W12 engine is available either in the 560HP version which delivers 650NM of torque at 1600rpm or the GTC Speed variant which delivers a massive 750Nm from 610HP. The car exhibited at the 2010 Geneva Motor Show featured the GTC Speed specifications.

Performance braking, cornering and traction functions mesh together to provide precise and immediate driving control under extreme or difficult conditions.
Self-adjusting air springs and electronic dampers operate independently for each wheel. Allwheel drive promotes advanced traction.

Homologation
The model is CEE homologated according to the new low-volume production directive. For the first time since its introduction, the type approval was awarded without destructive test, using simulation and FEM-analysis.

Bentley Continental Flying Star, 2010

Bentley Continental Flying Star, 2010

It takes an avid and passionate collector, with a taste for special coach building, to be at the basis of a project like the Bentley Continental Flying Star by Touring. Exactly such a person contacted Touring Superleggera in early 2008.

An interesting initial creative process emerged involving parameters for design, proportions, vehicle concepts and - last but not least- feasibility and technical factors. Many steps from design to execution were shared with the customer, who contributed with his own ideas and taste to personalise the project and create a unique automobile. A basic idea was formed by the desire to diversify Bentley's very successful Continental model range, and to explore new concepts.

The transformation of a 2-door coupé, by expanding the roof line and enlarging the interior dimensions, has led to a design concept baptised as shooting brake: a sports car featuring enough space to join a hunting party or a golf tournament with elegance and efficiency. Touring Superleggera explored the same field back in 1966, resulting in the amazing Lamborghini Flying Star II prototype. It was a dramatic interpretation of a sports car based on a new 2-volume design, safeguarding the dynamic performance. The Flying Star reference is a Touring parameter of sportive elegance, applied to many famous cars since the companies' start in 1926.

Flying Star in 2010 - the Bentley challenge
The Bentley Continental GT range set innovative and high standards for a new generation of very sophisticated Grand Tourers. As such, this model triggered the imagination of automotive designers and coach builders elsewhere. The GTC convertible, featuring a very rigid platform, proved to be a fully congruent basis to Touring Superleggera's plans for the new Bentley Continental Flying Star.

Project Engineering
The body engineering processes at Carrozzeria Touring are aimed at safeguarding key parameters for quality, safety and feasibility, within the perspectives of low-volume automotive production. The project went through 1:4 and 1:1 modelling, based on the CAD and CATIA data from the basic vehicle. This digital basis resulted in a milled 1:1 master model and a number of 1:1 moulds for the manufacturing of the new external skin, and for important new body components. The rear bodywork was reinforced with an integrated structure between the rear suspension domes, functioning both as roll bar, and as support for the new, extended roofline.

All structural additions and modifications were thoroughly studied, using advanced simulation methods and FEM-analysis. As a parallel process, these data served for the homologation of the structural changes, including the new foldable rear seats. An important number of hard points from the basic car could be saved and carried-over. The engineering team at Carrozzeria Touring was particularly pleased with the quality assurance support from Bentley engineers.

Design
'Variations on a theme' not rarely implicate a larger design challenge, than starting-off with a white sheet of paper. The basic mission was to create a body incorporating the essence of Touring elegance and harmony, while clearly recognizable as a Bentley. This task was challenging because a fully new volume had to be added to the GTC basis. The proportions were totally new, but the overall design had to be kept consistent. That is why only the section in front of the car's A-pillar, including the windshield has been maintained.

Viewed from the rear, the new tailgate dives between the wide rear wings. The oval rear light chrome bezels are a reference to Bentley fastback cars of the '50. The side view features a low roof, prominent quarter panel shoulders and wide wheel arches, suggesting perfectly mastered energy.

The Touring Superleggera designers were challenged by the target to give the new interior equal elegance, whether the back of the rear seats are folded or not. The solution was to design an "S" shaped trim of the rear quarter panels linking the passenger area to the rear luggage area. The beige and dark green leather contrast also adds to this visual unity.

First time ever in this class and size, the twin individual rear seats fold completely to create a flat loading surface more than 2m long with 1200lt capacity. This is instrumental to fulfill the functional mission profile, which requires loading in full comfort a wide array of leisure equipment, including 4 full golfing bags with the rear seats up. An example of bespoke finish is the woven leather boot carpet offering superior endurance and coordinated with the special luggage set.

The overall result is perfectly in line with the Touring and Flying Star heritage: a timeless shape, a design statement combining elegance and sportiveness, with a strong and unmistakable own personality and individuality.

Manufacturing
When digital technologies are blended with traditional manufacturing skills, a fascinating process emerges that is typical for Touring Superleggera. A discriminating factor for traditional coach building was and is the vast amount of handwork that is involved in the creation of a new body. In this process, multiple practical solutions are also found for a wide variety of minor technical issues. This includes quick, practical solutions based on years-long experience, common sense and an expert eye.

The result is a final product entirely produced within the high quality parameters of today's automotive industry.

From the A-pillar backwards, new exterior body panels were hand shaped in steel - including the roof, new wider rear wings, and the internal reinforcements of the complete rear section of the car. Aluminium was used for the door skins, and for the complete rear bonnet including its structure. New, handmade brightwork was added according to the new exterior design.

The all new rear compartment required shaping of the foldable rear seats and a full set of interior panels, leather trimmed with meticulous care. Wide leather hides were selected with great attention to provide uniform finish to the vast continuous surfaces.

Performance
The Bentley Continental Flying Star by Touring inherits the chassis of the Continental GTC. The 6-liter, W12 engine is available either in the 560HP version which delivers 650NM of torque at 1600rpm or the GTC Speed variant which delivers a massive 750Nm from 610HP. The car exhibited at the 2010 Geneva Motor Show featured the GTC Speed specifications.

Performance braking, cornering and traction functions mesh together to provide precise and immediate driving control under extreme or difficult conditions.
Self-adjusting air springs and electronic dampers operate independently for each wheel. Allwheel drive promotes advanced traction.

Homologation
The model is CEE homologated according to the new low-volume production directive. For the first time since its introduction, the type approval was awarded without destructive test, using simulation and FEM-analysis.

Bentley Continental Flying Spur Speed, 2009

Bentley Continental Flying Spur Speed, 2009

 

 

 Bentley - almost half of new Continental GTs now sold are Speed versions - Bentley now offers the 600bhp (610PS) W12 powertrain in the new Bentley Continental Flying Spur Speed to deliver a more powerful and engaging Bentley driving experience.

The Speed engine develops 15 percent more torque and nine percent more power than the standard Flying Spur, while engine efficiency is optimised by the use of lower friction, lighter-weight components and a new engine management system. The resultant performance is exceptional, with a top speed of 200mph (322km/h), a zero to 60mph sprint time of just 4.5 seconds (0-100km/h in 4.8s) and effortless overtaking capability.

The most powerful four-door Bentley ever made, the Bentley Continental Flying Spur Speed blends understated design cues to distinguish it from the Flying Spur. Its front grille and lower air intakes are dark-tinted chrome, while at the rear wider rifled sports exhaust tailpipes hint at the potential of the Speed model.

New 20-inch multi-spoke wheels available in both bright silver or darkened carry bespoke Pirelli PZero performance tyres introduced on the GT Speed model, which provide the car with superb grip and feedback.

The Speed's sporting performance is complemented by a highly capable chassis. Tauter handling and greater steering response with sharper turn-in and improved driver feedback is achieved through a retuned Servotronic steering system, direct-mounted front subframe and stiffer bushings.
Improved agility and body control is also achieved through uprated spring and damper settings as well as thicker anti-roll bars front and rear. To aid the car's high-speed dynamics, the Bentley Continental Flying Spur Speed's self-levelling air suspension sits 10mm lower.

The advanced electronic stability programme (ESP), uprated to ESP 8.1 for both models, provides a greater degree of driver interaction and control.

The Bentley Continental Flying Spur Speed offers a new 'Dynamic Mode' that allows increased wheel slip at higher speeds. Torque is reinstated more quickly after the traction control system is triggered, giving the spirited driver a greater sense of control and the ability to exploit the full potential of the new engine.

ENGINE
    * Type: 12-cylinder, 6-litre twin-turbocharged engine
    * Installation: Front, longitudinal, all-wheel drive
    * Construction: Alloy heads and block
    * Bore/stroke: 84 x 90.2mm
    * Capacit:y 5998cc
    * Compression ratio: 9.0:1
    * Valve gear: Chain-driven DOHC per bank, 4 valves per cylinder, cam phased inlet and outlet
    * Power: 600bhp/610PS/449kW @ 6000rev/min
    * Torque: 553lb ft/750Nm @ 1750rev/min
    * Fuel: 98 (95) RON

PERFORMANCE
    * Top speed: 200mph (322km/h)
    * 0-60mph (0-100km/h): 4.5 seconds (4.8 seconds)
    * 0-100mph (0-160km/h): 10.5 seconds (10.4 seconds)
    * 50-70mph (80-120km/h): 2.4 seconds (3.1 seconds)

Bentley Continental Flying Spur, 2009

Bentley Continental Flying Spur, 2009

 

 

The new Bentley Continental Flying Spur is set to deliver even greater levels of refinement, comfort and opportunities for customer personalisation. The class-leading 12-cylinder luxury saloon will also be joined by the 600 bhp (610PS) Bentley Continental Flying Spur Speed. The most powerful 4-door car ever produced by the British manufacturer, the Bentley Continental Flying Spur Speed offers the pure driving experience and uncompromising performance synonymous with all Bentleys bearing the Speed legend.

The Bentley Continental Flying Spur has been an extraordinary success story for Bentley since its launch in 2005. Its unrivalled combination of exciting performance, luxury, craftsmanship, style and four-door practicality has broadened the appeal of the Continental range. The Bentley Continental Flying Spur has become the most successful 12-cylinder luxury saloon in the world and has played a pivotal role in the revitalisation of Bentley.

The instantly recognisable style of the Bentley Continental Flying Spur undergoes a subtle evolution with changes to the front and rear design. The new, more upright grille and bolder lower air intake accentuate the distinctive Bentley profile, while the new rear bumper delivers a more aggressive and sleek appearance.

A comprehensive range of noise-absorbent measures including acoustic glazing, tri-laminate body undertrays and wheelarch liners ensure that cabin refinement, already a hallmark of the Bentley Continental Flying Spur, is best in class.
The new Bentley Continental Flying Spur may now be specified with a sophisticated follow-to-stop, radar-based Adaptive Cruise Control system, which monitors traffic ahead and manages the throttle and brakes to maintain a pre-set time gap, up to a driver selected set speed.

As a further option, the new Naim for Bentley audio system provides the world's best in-car sound stage. Designed exclusively for Bentley by Naim, the renowned British hi-fi manufacturer, the system features an 1100 Watt amplifier, the most powerful unit offered in a production car, and 15 custom-built Naim speakers, including dual Naim sub-woofers. The next-generation Digital Signal Processor further enhances the listening experience.

The aluminium-intensive suspension of the Bentley Continental Flying Spur features revised spring and dampers and a new bespoke 19-inch Pirelli UHP tyre for outstanding levels of ride quality, comfort and refinement.

Bentley's commitment to the highest quality of craftsmanship and customer personalisation is highlighted with an enhanced choice of beautifully crafted wood marquetry and chrome inlays. In addition, seat piping, a traditional Bentley feature, is introduced on Bentley Continental Flying Spur together with two new hide colours. Three new colours and four duo-tone paint combinations are added to the exterior paint palette.

The 600bhp Bentley Continental Flying Spur Speed unleashes the same potent performance and intense levels of driver engagement as its highly acclaimed stablemate, the Bentley Continental GT Speed.

Inspired by Bentley's legendary 'Speed' models that first appeared in 1923, the Bentley Continental Flying Spur Speed offers a range of headline performance figures including a 0-60mph sprint time of 4.5 seconds and a top speed of 200mph.

A lowered ride height, uprated and redesigned suspension as well as retuned steering deliver outstanding agility and body control. Exceptional grip comes from the unique 9.5Jx20 multi-spoke alloy wheels with bespoke Pirelli P-Zero UHP performance tyr

Bentley Sport Cars Bentley Silver Wings Concept

The British carmaker Bentley, owned by Volkswagen Group had displayed a W16 powered super sports cars at the Geneva Motor show. The project was conceived as a virtual mid-engined successor to the 1999 Hunaudieres Concept. The front end of this vehicle features an aggressive front splitter and air intake set up to emulate the F22 Jet and is characterized by the trademark Bentley domed grill and twin circular headlights.

The Bentley Silver Wings Concept also features a raised beltline and diminishing character lines that help define the supercar embodiment of this concept and elongate the rear-end of this vehicle. This really is the Bentley of supercars...

Dubbed the Bentley Sport Cars Bentley Silver Wings Concept, the concept is inspired by the brand’s racing heritage as well as the F22 Raptor jet fighter. Bentley Silver Wings Concept is the usual hodgepodge of design elements from Aston Martin, Zonda, Saleen and Bentley of course, but it still has a certain charm about it.

Bentley Sport Cars Bentley Silver Wings Concept

The Silver Wing concept car uses a harmonious mix between mid-engine layout and aggressive design cues. The front end uses an aggressive layout built around Bentley’s characteristic domed grille and headlights that draw inspiration from the company’s current design language. The exterior also includes large rear air intakes for the rear brakes, and the 20" or 21" alloy wheels.

Shawn Wood and Guohua Cheng are two industrial designers recently graduated from the Industrial Design course at Tianjin Academy of Fine Arts (TAFA), China. They are two college kids from China have come up with something that will blow your mind completely. The W16 display car, which was a concept called the Hunaudières had a cab-forward design with sleek looks and was done up in British Racing Green. The concept cars had more chrome than Ludacris’ Escalade.

Bentley Sport Cars Bentley Silver Wings Concept

Bentley Arnage Final Series

Bentley Arnage Final Series

Since its debut in 1998 the Bentley Arnage has conveyed an air of sophisticated understatement as the four-door flagship of the Bentley range. Over the last decade the car has undergone a process of constant refinement to its body, design, chassis and power train to maintain its class-leading position in the high luxury market.

To celebrate 10 years of the Arnage, 50 years of its mighty V8 engine and 90 years of the marque, Bentley Motors will launch its limited edition model at the 2008 Paris Motor Show.

Called the Bentley Arnage Final Series, the new model features a unique specification, combining the performance of the 500 bhp Bentley Arnage T with the refinement of the Bentley Arnage R and design elements from the Bentley Brooklands coupe, for the ultimate expression of British luxury and effortless power in a four-door saloon - a grand finale, for the grandest of Bentleys.

EFFORTLESS PERFORMANCE FROM CREWE'S MIGHTY V8
The engine, transmission, chassis and running gear of the Bentley Arnage Final Series are identical to those previously employed in Arnage T. In this specification, Bentley's remarkable all-aluminium 6 ¾ litre V8 engine produces 500 bhp (507PS/373kW) and 1000 Nm (738lb ft) of torque - figures that ensure that the legendary Bentley 'wave of torque' delivers effortless performance for a unique driving experience.

Acceleration to 60 mph is accomplished in 5.2 seconds (0-100km/h in 5.5 secs) with 100 mph reached in 12.1 seconds (0-160km/h in 12.0 seconds). Top speed of the Bentley Arnage Final Series is 179 mph / 288 km/h. Each V8 engine bears the signature of the team leader who oversaw its hand-built construction in the Crewe factory.

The six-speed ZF automatic transmission, first introduced for the 2007 model, ensures optimum flexibility, response and refinement. Three transmission modes (Drive, Sport and Semi-Automatic) allow the driver to take full advantage of the powerful 500 bhp V8 engine.

BENTLEY ARNAGE FINAL SERIES - TECHNICAL SPECIFICATION

* POWERTRAIN
o Engine type: Twin-turbocharged 90-degree V8
o Engine displacement: 6 3/4 litres, 6761 cc
o Maximum power: 500 bhp / 507 PS / 373 kW @ 4,200 rev/min
o Maximum torque: 738 lb ft / 1,000 Nm @ 3,200 rev/min
o Compression ratio: 7.8:1
o Emission standards: EU IV / US LEV II
o Transmission: 6-speed ZF automatic gearbox with semi-automatic and sports functions

* PERFORMANCE
o 0-60 mph: 5.2 sec
o 0-100 km/h: 5.5 sec
o 0-100 mph: 12.1 sec
o 0-160 km/h: 12.0 sec
o Maximum speed: 179 mph / 288 km/h
* CHASSIS
o Steering: 3.11 turns lock-to-lock
o Steering Type: Speed sensitive, hydraulic power assisted, rack and pinion steering system
o Suspension: Fully independent, double wishbones front and rear, with coil springs and computer-controlled adaptive, electro-hydraulic dampers and automatic ride-height control
o Braking (front/rear): Micro-alloy ventilated discs

* FUEL CONSUMPTION
o Urban: 28.8 litres/100km (9.8 mpg)
o Extra-urban: 14.1 litres/100km (20.1 mpg)
o Combined: 19.5 litres/100km (14.5 mpg)
o CO2 (EU): 465 g/km (combined)

* DIMENSIONS AND CAPACITIES
o Overall length: 5400 mm (212.60 in)
o Overall width: 2125 mm (83.66 in)
o Overall height: 1515 mm (59.65 in)
o Wheelbase: 3116 mm (122.68 in)
o Front track: 1602 mm (63.07 in)
o Rear track: 1602 mm (63.07 in)
o Width: 1932 mm (76.06 in) across door handles
o Width: 1900 mm (74.8 in) with mirrors folded
o Luggage compartment: 0.374m3 / 374 litres / 13.2 cu ft

* WEIGHTS
o Kerb weight: 2585 kg (5699 lbs)
o Gross vehicle weight: 3065 kg (7948 lbs)
o Front axle weight: 1535 kg (3384 lbs)
o Rear axle weight: 1615 kg (3560 lbs)
o Fuel tank capacity: 96.0 litres (25.3 US gallons)